Switch on the device

The power switch is located on the front of the device to the right of the display:

To switch on, this button must be short (max. 1s) must be pressed.

After switching on, the appliance takes approx. 1 minute to start:

The display lights up first and shows the message "Merlin, please wait"

After a brief moment, the display goes black

When the device is fully started, the display shows

uap0: 192.168.50.1

and

uap0 is the WLAN IP address of the access point in the device. The user's end devices are connected via this IP address, see Merlin WLAN Koppelung.