Outputs KA450

Transducer

The transducer connected to the "air receiver" output can be selected here.

Stunning channel

Here you can select the transducer via which the deafening noise is output if the air receiver is selected as the transducer.

Always set the "air receiver" here.

Damping mode

Here you can set the masking mode that is to be set when the air receiver is activated.

Base level

The sound pressure level in dB_HL which is to be set when the air receiver is activated.

Transducer

The transducer connected to the "Bonephone" output can be set here.

Always set "B-71" here.

Stunning channel

Here you can select the transducer via which the masking noise is output if the bone receiver is selected as the transducer.

Always set the "air receiver" here.

Damping mode

Here you can set the masking mode that is to be set when the air receiver is activated.

Base level

The sound pressure level in dB_HL which is to be set when the air receiver is activated.

Transducer

The converter connected to the "Free field" output can be set here.

Always set "JBL C1G" here.

Stunning channel

Here you can select the transducer via which the masking noise is output if the bone receiver is selected as the transducer.

Always set "Free field" here.

Damping mode

Here you can set the masking mode that is to be set when the air receiver is activated.

Base level

The sound pressure level in dB_HL which is to be set when the air receiver is activated.

Transducer

The transducer connected to the "External" output can be set here. This is usually the "Active speaker" or "None" transducer or an additional air receiver.

Stunning channel

Here you can select the transducer via which the masking noise is output if the bone receiver is selected as the transducer.

Always set "External" here.

Damping mode

Here you can set the masking mode that is to be set when the air receiver is activated.

Base level

The sound pressure level in dB_HL which is to be set when the air receiver is activated.